How Does a Street Sweeper Work? Brushes, Suction and Water Explained
Understand the brush, suction, hopper and optional water systems on a municipal street sweeper, plus checks when performance drops.
Read guide →Buyer knowledge centre
Municipal truck buying and specification guides
Use decision-focused guides to compare capacity, payload, equipment, cost and import scope before requesting supplier quotations.
Practical guidance
Latest buyer resources
Each guide starts with the decision a buyer needs to make, then explains trade-offs, information requirements and quotation checks.
Buying a Road Sweeper for Nigeria: An RFQ Checklist
A practical road sweeper RFQ for Nigerian buyers: route inputs, quotation comparison, inspection points and SONCAP document timing.
Read guide →How Much Does a Vacuum Truck Cost? New vs Used and Import Cost Factors
A vacuum truck’s final cost depends on nominal tank size, pump technology, chassis specifications, targeted waste media, integrated high-pressure jetting capabilities, and whether you procure new or used equipment. Total acquisition outlays also heavily reflect international freight modes, destination import tariffs, regional emissions conformity, and mandatory local road registration compliance.
Read guide →What Is a Skip Loader? Skip Loader vs Hook Lift Truck for Waste Collection
A skip loader uses twin hydraulic lifting arms and chains to hoist, transport, and tip standardized open-top skips. In contrast, a hook lift truck employs a heavy-duty hydraulic hook and sliding jib to roll-on and roll-off containers. Skip loaders suit smaller, fixed-dimension bins, whereas hook lifts manage heavier, high-capacity, multi-body municipal and industrial transport.
Read guide →How to Choose a Refuse Compactor Truck: 8m³ vs 12m³ vs 16m³
An 8m³, 12m³ or 16m³ refuse compactor should be selected by route access, waste density, legal payload, bin type and disposal distance—not body volume alone. This guide compares the three capacities and shows what buyers should verify before requesting a quotation.
Read guide →How Much Does a Garbage Truck Cost? A Buyer’s Cost Breakdown
There is no fixed price for a garbage truck without an agreed engineering specification. This guide explains how body type, chassis, capacity, steering, emissions, options and shipping terms affect the final procurement cost—and how buyers can compare quotations on a like-for-like basis.
Read guide →Street Sweepers for Nigerian Councils: Which Cleaning System Fits?
Compare mechanical, suction and combined washing systems for Nigerian municipal routes, with a practical capacity worksheet and RFQ inputs.
Read guide →How to Choose the Right Vacuum Truck or Cesspit Emptier
Selecting the right vacuum truck requires identifying your target material before determining tank capacity. A standard cesspit emptier handles domestic septic wastewater, but high-viscosity sludge, abrasive grit, and grease require higher vacuum levels, full-opening rear doors, hydraulic tipping, and dedicated jetting systems. Matching pump technology and body structural ratings to waste density prevents severe operational failure.
Read guide →How Does a Garbage Compactor Truck Work? Loading, Compaction and Discharge Explained
A rear-loader garbage compactor operates through a continuous mechanical cycle: waste is loaded into a rear hopper, swept and crushed into the storage body by hydraulic slide and scraper plates, compressed against an internal ejection blade, and ultimately discharged at disposal facilities by hydraulically lifting the tailgate and extending the ejector.
Read guide →What Size Water Bowser Do You Need? 5,000L vs 10,000L vs 20,000L
To choose the right water bowser size, you must balance your daily water demand against refill distance, route road access, legal axle payload limits, required spray width, and local chassis maintenance capabilities. Selecting purely based on tank capacity leads to illegal axle overloads, slow refill cycles, or restricted job-site maneuverability.
Read guide →